Posts: 4,495
Threads: 187
Joined: Feb 2012
Location: Missouri, USA
(01-17-2024, 02:21 PM)EdK Wrote: I hope they revoke his driving privileges for at least five years.
Ed
Unlikely. The guy that ran a stop sign in front of the wife and I (witnessed by several other drivers) didn't have a drivers license on him nor any proof of insurance. The cops determined he was an Uber driver and had to contact the company to get insurance info. Body shop estimate on my car was $2700 and their insurance wanted to give me $1050 and total my car!
I kept the car and I paid out of pocket for the repairs. The guy that hit us... didn't even get a single ticket. I just pray that Karma is real.
Willie
Posts: 14
Threads: 1
Joined: Oct 2021
Location: Anderson, IN
(01-17-2024, 02:06 PM)rleete Wrote: So, I decided it was time for some custom bodywork on the truck. I think I went a bit overboard, but it should buff out, right?
I sprained my ankle, bruised the other one, and have a small cut on my nose where my glasses bit me. Other guy ran the light, and I never saw him coming. His truck was toast, buckled in the middle and front end torn off.
That sucks man! Glad you could at least limp away. It’s a zombie world now a days with all the technology and Meth! I had a freaking meth head hit us and flip or car about five years ago. We were sore for along time, but okay. The turd didn’t even a drivers license.
I hate seeing this.
Posts: 8,891
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
Posts: 798
Threads: 52
Joined: Mar 2012
Location: Rochester, NY
At the insistence of the wife, I went to urgent care last night and got x-rays. No broken bones, just a bad sprain. I took the day off to stay off my feet.
Truck is at the repair shop now; we'll see what they say. I'm guessing total loss, but you never know.
I do know that time in the shop isn't going to happen for a while, and that is more frustrating than the accident.
Full of ideas, but slow to produce parts
Posts: 8,891
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
The following 1 user Likes EdK's post:
Highpower (01-18-2024)
I hope you have a speedy recovery.
Ed
Posts: 2,328
Threads: 271
Joined: Jun 2014
Location: La Libertad, Philippines
01-21-2024, 07:26 AM
(This post was last modified: 01-21-2024, 07:28 AM by Dr Stan.)
(01-17-2024, 02:06 PM)rleete Wrote: So, I decided it was time for some custom bodywork on the truck. I think I went a bit overboard, but it should buff out, right?
I sprained my ankle, bruised the other one, and have a small cut on my nose where my glasses bit me. Other guy ran the light, and I never saw him coming. His truck was toast, buckled in the middle and front end torn off.
Had a similar experience with my then brand new 2018 VW Jetta diesel. Hadn't even changed the oil.
BTW, did the airbags deploy? If so, it may be totaled.
Glad personal damage was minimal. One can always replace a vehicle. People are a different story.
Posts: 798
Threads: 52
Joined: Mar 2012
Location: Rochester, NY
No airbags deployed. He hit me right at the bumper/fender interface and spun me around 270 degrees.
Full of ideas, but slow to produce parts
Posts: 2,629
Threads: 101
Joined: Dec 2014
Location: Michigan
The following 1 user Likes Vinny's post:
rleete (01-23-2024)
(01-17-2024, 02:06 PM)rleete Wrote: So, I decided it was time for some custom bodywork on the truck. I think I went a bit overboard, but it should buff out, right?
A little duck tape should fix it right up.
Quote:I sprained my ankle, bruised the other one, and have a small cut on my nose where my glasses bit me. Other guy ran the light, and I never saw him coming. His truck was toast, buckled in the middle and front end torn off.
Same as above, a little duck tape and you'll be fine.
Good to hear it wasn't worse and that you're up and kinda moving around.
Posts: 8,891
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
The following 3 users Like EdK's post:
Highpower (02-05-2024), rleete (02-05-2024), Vinny (02-06-2024)
When clamping a 6" x 6" x 1/4" steel plate in the band saw I noticed that the top of the movable jaw was tilting back at the top thus not clamping to the plate. This cause a lot of vibration so I had to abort the cut and see if I could fix the issue. Since the face that sits on the band saw base was fairly flat I used that as the reference face to put towards the fixed jaw on the mill. I had to take .030" off to get it flat. Then I measured the squareness and the reference surface was off just a bit so as long as I had the mill set up I decided to skim that face. Only needed to take off 5 thou.
I put the saw vise back together but the tilting was still there. I think the leadscrew nut on the band saw is moving when clamping the work piece in the vise.
I'll need to look at that next. I took a break from working on that to clean up the cast iron swarf from the mill and vise.
Ed
Posts: 2,328
Threads: 271
Joined: Jun 2014
Location: La Libertad, Philippines
The following 3 users Like Dr Stan's post:
f350ca (02-05-2024), EdK (02-06-2024), Vinny (02-06-2024)
02-05-2024, 07:57 PM
(This post was last modified: 02-05-2024, 08:11 PM by Dr Stan.)
Oh for wanting a forklift. Would have been finished in 30 minutes or less. Finally resorted to typical Philippine methods and just picked it up, all 500 KG. Fortunately I had some foresight and reinforced the floor joists prior to laying the flooring. Been sitting in its crate for 2 years. Just too much "stuff" to get done.
I'll further reinforce the floor with 19mm marine plywood.
BTW, who else gets to use rough sawn mahogany as cribbing?
|