12-28-2015, 09:02 AM
Not too much exciting over the weekend. I just had to move a few things around and I wanted to get them done so I was ready to launch into the new year ready for work in the shop.
I made another aluminum plate which I affixed to the lathe backsplash to hold a new exended tip live center and a bull-nosed live center that I recently purchased.
Moved my bench grinder back over in between my drill press and my disc/belt sander.
Vertical and horizontal bandsaw placed between man door and large rollup door. The Baileigh horizontal is on casters so when I need to cut long stock I can merely move it out away from the vertical saw.
I am a little tight between my lathe, drillpress, floor mounted bench grinder and my belt/disc sander but I am running out of options as I am pretty much busting at the seams in my shop.
This should still allow for easy access to each of the tools though.
Mike.
I made another aluminum plate which I affixed to the lathe backsplash to hold a new exended tip live center and a bull-nosed live center that I recently purchased.
Moved my bench grinder back over in between my drill press and my disc/belt sander.
Vertical and horizontal bandsaw placed between man door and large rollup door. The Baileigh horizontal is on casters so when I need to cut long stock I can merely move it out away from the vertical saw.
I am a little tight between my lathe, drillpress, floor mounted bench grinder and my belt/disc sander but I am running out of options as I am pretty much busting at the seams in my shop.
This should still allow for easy access to each of the tools though.
Mike.