Posts: 2,620
Threads: 100
Joined: Dec 2014
Location: Michigan
The following 2 users Like Vinny's post:
Mayhem (07-26-2015), PixMan (07-27-2015)
maybe you can use it to move a heater into your shop..
Posts: 968
Threads: 67
Joined: Apr 2015
Location: Australia
I've got an engine crane but it won't get in close to my lathe for chuck changing etc due to the foot brake, the legs on the crane are too close together to approach from the headstock end too. I installed a swinging gantry over my lathe, you can see it in the photo in my introduction, it was being removed from a local petrol station so I enquired and got it for scrap price. I used a cheap lifting winch off ebay, with a beam truck that I also bought off ebay and modified to suit. The winch is ideal for the job and was too cheap to even consider making one. Since the photo I have added a chain support to the swinging beam, I put my mill within the arc of the gantry and I was a bit concerned about the weight of the vertical milling head.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
You could go with an overhead crane attached to the ceiling. With the clutter in my shop a gantry crane would be worthless. The overhead cranes cover the whole shop and allow me to move stuff over and above the clutter. For a light duty one barn door track would work for the rails that are attached to the ceiling.
Free advice is worth exactly what you payed for it.
Greg
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Because the rest of the posts were about a shop/engine crane they have been moved to here
http://www.metalworkingfun.com/thread-2802.html
DaveH
