01-15-2013, 11:30 AM
Nice workmanship Brian. Even with all the hand work, it still looks "machine made" (compliment intended). 
Tom
Tom
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)
|
Minimal Clockmaking
|
 
02-02-2013, 03:36 PM
(01-15-2013, 11:30 AM)TomG Wrote: Nice workmanship Brian. Even with all the hand work, it still looks "machine made" (compliment intended). Thanks Tom from you, thats a real compliment. Just to keep things ticking over while i wait (forever) for a no57 drill. this is the first part to go together . Brian. 
02-02-2013, 04:24 PM
Nice work Brian , thanks for these interesting postings.
sasquatch, proud to be a member of MetalworkingFun since Jul 2012.
02-02-2013, 06:13 PM
Yep,
Very interesting  DaveH
02-04-2013, 11:31 AM
Just made the baby Top Hat bushes that are required because I am using steel plates.
Brian.
Had to take time off for rebuilding the boat engine. but storms have got in the way ,so it's into the shop again.
Made the main arbor and did a trial assy. Coming on  Brian.
02-13-2013, 12:01 PM
Hi Brian,
Is it fixed to that shaft? They are tiny little screws - what size are they? DaveH
02-13-2013, 12:07 PM
Hey Somethings going wrong I just realized this is the first time that I did the drawing then made the part?? Not like me at all ,must be getting ill or worse still, old ,
I think I need a lie down  Brian.
02-13-2013, 12:14 PM
Hi Dave
The gear will be fixed but the ratchet is free . The screws are 8 BA the smallest on this clock will be 10BA, Brian. Thanks given by: DaveH
02-21-2013, 01:29 PM
" more photos , This time of the plates with the bushings fitted.
the taper broach is used to enlarge the bushes until the arbor fits. Brian. |
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 21 Guest(s)