a new compound slide

[doubleboost]

You got Robs camera
Looking very good bob
John

[krv3000]

shhhhhh i put it in the box with the other stuff thats why he ant posted out he is looking for it

[krv3000]

hi all last bit i had a pace of plat 14.5mm thick by 150x 400mm i hand cut this dawn to 105 x 105 then squared this off to 100 x 100mm in the 4 jaw chuck sos no pics of that bit then i marked up and drilled the two front fixing points then set it up in the 4 jaw chuck then made the plate 13mm thick once i Had dun that i marked out the place for the fixing ring then machined that out drilled three fixing points in to the clamping ring and drilled and taped m6 in the bottom of the compound slide bolted all together and all is dun right pics

[doubleboost]

Hi
Bob
That looks much better now

(did Rob get his camers back)
John

[RobWilson]

Spot on Bob

Rob

[Mayhem]

Nice work Bob.

[DaveH]

Bob,

You "nailed" that

Even your paint is shiny

Good job

DaveH

[stevec]

Excellent Bob, now get a QCTP on it .
Steve

[krv3000]

hi shhhh i have a project for rob to try out his home billed cnc after all he needs to test it

[stevec]

Gotcha Bob, mum's the word.