626 milling machine converted to CNC

[krv3000]

all cuming to plan well dun rob

[RobWilson]

Cheers Lads


Spun the nut 90 deg and machined of the excess from the nut mount .


Plenty of room for the pulley and the nut to pass


I will have to make a new nut mounting block as it looks naff as is


Rob

[RobWilson]

Hi Lads


Made a start on the Z axis bearing mount ,,,,,, chopped a wee bit of one of my large lumps of scrapbinium .


Slapped it in the CUB lathe ,, for turning and boring ,,,,,,,,,,,,ruffing shot.


And a few hours later ,,,,,,,,,, all the turning and boring done .



Enough for today ,,,,,,,,,,,,,i will stick it on the mill tomorrow .


Rob

[DaveH]

Rob,

Nicely done

Shiny as ever

DaveH

[doubleboost]

Very nice Rob
I see that special camera lens is working fine now (the one that hides all the machining marks)
John

[krv3000]

well dun rob you got the polish out avent you

[RobWilson]

cheers lads


I did not get as much done to this today as i would have liked ,, i had a few other small projects to get out of the way :dremel: ,,,,,, milled up the edges of the block as i had just left them ruff sawn as the job was gripped in the four jaw for turning .


now it fits into the knee.

turned up a gauge from a bit scrap bar , to gauge the fit between the lugs .



Rob

[DaveH]

Rob,
Looking good

DaveH

[doubleboost]

Not a bad finish on that bit of "scrap bar"
I cant remember a cylindrical grinder in your shop
I don't think you will have any problems with flex on that block
John

[EdK]

Rob,

Absolutely gorgeous parts you're making. Keep the pictures coming.

Ed