Posts: 691
Threads: 14
Joined: Feb 2015
Location: Oakland, California
Good lookin' wheels ya got there, Dave.
I put some never-flat wheels on a table saw. It moves like a wheelbarrow, much more convenient than the crap little castors. They get flat spots, sadly. I need to move the axle up a bit so the wheels don't bear any weight when not in use.
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
I decided to go with 1.25" x 1/8" angle (30x3mm)
Here is a prelim sketch, it was going well until a wheel fell off
DaveH
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Also I've changed my mind regarding the steering - going with a 'friction plate' steering and not the 'pedal car' steering as shown.
DaveH
Posts: 2,620
Threads: 100
Joined: Dec 2014
Location: Michigan
How's that gonna work out with a missing wheel?
I like your CAD model Dave , what ya using ?
Rob
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
(09-19-2015, 01:23 AM)RobWilson. Wrote: I like your CAD model Dave , what ya using ?
Rob
Hi Rob, it was called Alibre taken over by Geomagic and now called Cubify Design.
DaveH
Cheers Dave
It looks a good CAD program ,very popular .
Rob
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
The following 3 users Like DaveH's post:
f350ca (09-27-2015), Mayhem (09-27-2015), Highpower (09-27-2015)
Here's the frame
DaveH
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
As some of you may know I bought a new computer a year back. Don't use it much because I didn't like win 8.1. I thought win 10 would be better, .......... didn't like it. So back to win 7 and I have started to use it.
What does this have to do with this Small Garden Cart? ................ well all the drawings both the 3d and 2d drawings I saved to a memory stick. Now I can't find the memory stick
So I've given that up and redrawn it all.
So I'll post a pic with the friction plate steering - just have to tidy it up a little.
DaveH
a child of the 60's and 50's and a bit of the 40's
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Meanwhile making the front and rear axles.
32 x 2mm thick square tube and weld in the 'stub axle'
DaveH
a child of the 60's and 50's and a bit of the 40's
