Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
if I was looking at it I'd have him plug it in and run it first. pretty nice looking shaper be nicer if it had a shaper vise on it.
you shouldn't have any trouble getting more then what this guy wants for the logan.
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
Probably be hard finding a vice in Canada if it doesn't have one.
Tried calling tonight but no answer, see how it goes.
Will definitely want to hear it run, expect it will be quieter than the Logan, it has a chain drive and the reeves drive, not a silent combination.
Thanks
Free advice is worth exactly what you payed for it.
Greg
Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
my little 7 inch delta purrs like a kitten when running, I have the original vise on it, the big one I wasn't so lucky to get a vise with it.
16 18 inch shaper can pull a lot of metal off fast even if they look like there running slow as molassas
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
Posts: 691
Threads: 14
Joined: Feb 2015
Location: Oakland, California
No experience with a Peerless, but I do have a 7" Rhodes.
If I had unlimited shop space, I'd **totally* go after that. I love me some shaper action. The Rhodes is a bit small for my needs, though.
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
The following 1 user Likes f350ca's post:
Mayhem (08-31-2015)
Finally got the chap on the phone. Think he bought the property and the shaper was included. Doesn't think there is a vice but didn't know what one looked like. Guess we're going on a 2 hour drive Wednesday to have a look.
Free advice is worth exactly what you payed for it.
Greg
Posts: 8,889
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
Road trip! Good luck Greg.
Ed
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
Looks like we're the proud owners of 4000 +/- pounds of cast iron. When the chap moved it from one building to another he had to pick up a big rock in the backhoe bucket to counterbalance the shaper on the forks out front. Its about the size I expected, the photos he posted made it look small.
Quality control and Nova stepped in for a size comparison.
No vice and there was no single phase power in this building to power it up? All the gears look good and the ram moves fine so we took a gamble. Got it for $400, about twice scrap price, so not a huge gamble.
Now hav to figure out how to get it home.
Free advice is worth exactly what you payed for it.
Greg
Posts: 8,889
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
Good grief, that thing is huge.
Ed