Wilton Verti-Lock Mill Vise question

[Swede56]

(05-21-2015, 05:40 PM)Mayhem Wrote: You have a mill - make a stop.

Sounds like a good idea know where I can get a plan for making one.

I like to make stuff on the mill.
I made a couple T-nuts and purchased a couple grade 8 bolts so I wouldn't have to rob the hold down set I bought for the mill.

[Mayhem]

Google will be your friend here.

The simple stop is one that bolts to the back of your vise (you should have two threaded holes already there). Something like this:

http://www.cnccookbook.com/MTMillKurtViseStop.htm

Look at the various adaptations and settle on one you like or modify one to suit your needs.

[DaveH]

Here
http://www.metalworkingfun.com/showthrea...47#pid4147
another http://www.metalworkingfun.com/showthrea...11#pid3611

 
DaveH

[EdK]

(05-22-2015, 11:38 AM)DaveH Wrote: Here
http://www.metalworkingfun.com/showthrea...47#pid4147
another http://www.metalworkingfun.com/showthrea...11#pid3611

 
DaveH

Dave,

Find the thread on the one I made because I can't.

Ed

[DaveH]

Hi Ed,
I looked mate - couldn't find it  
Are you sure you made one - I know you made a lathe stop but I don't remember a vice stop.
 
DaveH

[DaveH]

Sorry Ed, you did make one and here it is finished
http://www.metalworkingfun.com/showthrea...0#pid21700

 
DaveH

[Mayhem]

Thanks Dave - I couldn't find them either.

[EdK]

(05-22-2015, 04:46 PM)DaveH Wrote: Sorry Ed, you did make one and here it is finished
http://www.metalworkingfun.com/showthrea...0#pid21700

 
DaveH

Thanks Dave you search god.

I guess I didn't do a full thread on that project like I thought I had.

Ed