05-07-2015, 09:15 AM
I definitely sense a large area of negative pressure originating from Vinny's direction. 
Willie
|
Table for my mill
|
 
05-09-2015, 07:40 PM
Picked up the steel today. That stuff is HEAVY! The 4x4's aren't 1/4" like I thought. They're 5/16" thick. It was a pain to load but unloading wasn't bad. Pulled the hilo up to the back of the truck, raised the forks even with the tailgate and slid them on. I didn't bother taking them off the forks, I just moved them where I figure I'll store them for now, dropped the forks and parked it. Seeing as how thick they are, looks like a plasma cutter is in my not too distant future. I've got my eye on a 50A pilot arc.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
05-09-2015, 07:59 PM
(05-09-2015, 07:40 PM)Vinny Wrote: Picked up the steel today. That stuff is HEAVY! The 4x4's aren't 1/4" like I thought. They're 5/16" thick. It was a pain to load but unloading wasn't bad. Pulled the hilo up to the back of the truck, raised the forks even with the tailgate and slid them on. I didn't bother taking them off the forks, I just moved them where I figure I'll store them for now, dropped the forks and parked it. Seeing as how thick they are, looks like a plasma cutter is in my not too distant future. I've got my eye on a 50A pilot arc. No pictures, it didn't happen.  Ed
05-09-2015, 11:38 PM
Twas getting dark so I didn't take any. Tomorrow.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique
05-10-2015, 02:27 AM
Hi Vinny
![[Image: _ThisThreadIsUselessWithoutPics_zps0kt8d8ok.jpeg]](http://s1066.photobucket.com/user/RobWilson100/media/_ThisThreadIsUselessWithoutPics_zps0kt8d8ok.jpeg.html) Rob
05-11-2015, 03:33 PM
Poured rain most of the day yesterday so when I got home before it started raining any harder I took some quick pics. Here they is:
![[Image: steel2.jpg]](http://metalshop.nobucks.net/pix/steel2.jpg) ![[Image: steel1.jpg]](http://metalshop.nobucks.net/pix/steel1.jpg) I'm not worried about the cuts in them, I'll make use out of 'em.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique 
05-11-2015, 07:00 PM
Great score. Those aren't rusty, thats prep for the paint. I clean mine up with a flap wheel on the grinder, the rough surface holds paint far better than new metal.
Free advice is worth exactly what you payed for it.
Greg 
05-11-2015, 07:04 PM
Good haul Vinny, I'd be on that like a dog on a bone.
 Oh, and by the way,  Steve 
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
05-21-2015, 05:26 PM
Planning on starting on this tomorrow. Don't know if I'll get to the stick welding but I hope to at least tack it. When it comes to the stick welding portion, is 3/32" 6011 rod ok? The steel is both 1/4" and 5/16" thick.
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique 
whatever your comfortable with is what works best. Me I'd use 1/8 7018 but that's just me.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough! 
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 4 Guest(s)