|
5 Cylinder Radial
|
04-29-2020, 01:27 AM
Oh how i wish it was truly Job totally done, unfortunately it's just the spinner, and that breeds another job of making the starter drive with a rubber lining and a sprag clutch to catch the over run.
Lot's more to do Brian. 
04-29-2020, 07:36 AM
Ah well, we'll be patient. I figured you at least had an ignition system to create yet before we hear it purr.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components. 
04-29-2020, 09:19 AM
I'm thinking a RC biplane.
04-30-2020, 08:52 AM
(04-29-2020, 01:27 AM)Brian Wrote: Oh how i wish it was truly Job totally done, unfortunately it's just the spinner, and that breeds another job of making the starter drive with a rubber lining and a sprag clutch to catch the over run. Starter drive? Methinks you've spoiled yourself Brian. When I was a youngster all we had were "chicken sticks".  Just kidding. When I had my helo the starter drive / fuel pump box was an absolute necessity.
Willie
06-19-2020, 01:02 AM
Now it's back to the serious stuff, making piston rings.
Just turn a tube of Iron a little oversize. Split it lengthwise to create the ring gap. Clamp it in the chuck tightly to close the gap. Turn the ring to size inside and out., Part off. 26mm diameter--- 1.5mm wide---1mm thick. There now that was simple wasn't it ????? Brian. 
03-24-2021, 07:50 PM
(04-29-2020, 01:27 AM)Brian Wrote: Oh how i wish it was truly Job totally done, unfortunately it's just the spinner, and that breeds another job of making the starter drive with a rubber lining and a sprag clutch to catch the over run. Very nice Brian Has come a long way since the last time I saw it. Perfect way to spend time indoors. Pep
Magazines have issues, everything else has problems
03-28-2021, 11:41 AM
Steady progress being made, . The ignition system is nearly done just the hall sensors to be mounted. Then i need a stand for the engine so i can get on with the Oil and Fuel tanks. Battery. Tach. Throttle. ETC ETC Brian
03-28-2021, 11:55 AM
Looks great and gettin close!!
Logan 200, Index 40H Mill, Boyer-Shultz 612 Surface Grinder, HF 4x6 Bandsaw, a shear with no name, ...
the nobucks boutique etsy shop | the nobucks boutique 
03-28-2021, 12:01 PM
(03-28-2021, 11:41 AM)Brian Wrote: Steady progress being made, . The ignition system is nearly done just the hall sensors to be mounted. Then i need a stand for the engine so i can get on with the Oil and Fuel tanks. Battery. Tach. Throttle. ETC ETC It's coming along nicely, Brian. I applaud you perseverance.  What did you use for spark plugs? Tom ![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)
03-28-2021, 12:13 PM
Hi Tom The plugs are from the hit and miss engines sold by Banggood. I
also have kits from Hemingway. to make circular discharge plugs if necessary. Just beginning to se a light at the end of the tunnel. Brian. |
|
« Next Oldest | Next Newest »
|
