Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
(10-19-2014, 12:39 PM)f350ca Wrote: Never tried it, does alcohol dissolve oil?
Greg, it depends on how much you drink.
Ed, mine has a point on one end and a pin (like yours) on the other. I've memory serves (and seldom does
) I think my ends "screw into the ends of the spring, but I'm not in any rush to find out.
Steve
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 735
Threads: 34
Joined: Feb 2012
Location: Minneapolis, MN
(10-19-2014, 12:39 PM)f350ca Wrote: Never tried it, does alcohol dissolve oil?
My experience is "it depends".
I am assuming we are talking about isopropyl alcohol. I have 70% and 91% ... what you usually find in the local drug store ... and it seems to be pretty useless. Mineral spirits or acetone seems to work at least as well or better.
I have some 99.9% that works really well, especially when cleaning flux from electrical circuit boards.
40% Vodka only gave the impression of doing a great job.
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Animal, vegetable or mineral
DaveH
Posts: 535
Threads: 39
Joined: Jan 2013
Location: Kelowna, BC, Canada
Probably attaches the spring at the other end.
Mike
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.
Posts: 3,798
Threads: 184
Joined: Jun 2012
Location: Farmington Hills, Michigan
The following 2 users Like TomG's post:
Highpower (01-18-2015), EdK (01-19-2015)
I suspect the screw can be run through to release the spring without stretching it, but I normally just clean mine with solvent while assembled. I use clock oil as a lube so it doesn't gum up.
Tom
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
The following 1 user Likes DaveH's post:
EdK (01-19-2015)
Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia
The following 1 user Likes Mayhem's post:
EdK (01-19-2015)
I've just discovered that you have to really watching your spelling and/or disable predictive text when you do a Google search for clock oil
Hunting American dentists since 2015.
Posts: 218
Threads: 9
Joined: Dec 2014
Location: Bristol Ct. USA
I use a small ultra-sonic cleaner to clean mine occasionally. I found the cleaner at a Good Will Store.
"Billy G"
Posts: 4,452
Threads: 184
Joined: Feb 2012
Location: Missouri, USA
Posts: 218
Threads: 9
Joined: Dec 2014
Location: Bristol Ct. USA
The following 1 user Likes Bill Gruby's post:
EdK (01-19-2015)
(01-19-2015, 08:32 AM)Mayhem Wrote: I've just discovered that you have to really watching your spelling and/or disable predictive text when you do a Google search for clock oil
Dropping just one letter can get you into an awful lot of trouble. Think I'll let it go at that.
"Billy G"