Posts: 97
Threads: 5
Joined: Jun 2014
Location: las vegas burbs
The following 1 user Likes kenne's post:
EdK (06-14-2014)
06-13-2014, 11:00 PM
(This post was last modified: 06-14-2014, 06:51 PM by kenne.)
[img]http://[/img]I found that I needed new oilers for my cincinnati lathe , and if I bought them for $10.00 each from McMasters the total would be around $100.00 .
That coincidentally is the exact number that brings my wife out to the shop with a vengeance, known to only a select few.
So I devised a way to avoid this particular fate, I used some 1" 6061 round stock to make these and so far they work very well and look passable . (the photo's don't show the bit of felt in the bottom ).
This makes a good drip system and lasts all day (normal day is about 6-8 hrs.) , I am not as young as I used to be , so this is a long day .[img]http://[/img]
kenne, proud to be a member of MetalworkingFun Forum since Jun 2014.
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
Nice! How do you get'em to drip sideways?  
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 97
Threads: 5
Joined: Jun 2014
Location: las vegas burbs
(06-14-2014, 06:58 AM)stevec Wrote: Nice! How do you get'em to drip sideways?
Fortunately I am better at machine work than photography , I will figure out how ,
I did this later and get back to you .
kenne, proud to be a member of MetalworkingFun Forum since Jun 2014.
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
No worries Ken, I was just being a smart a$$.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 4,463
Threads: 184
Joined: Feb 2012
Location: Missouri, USA
The following 2 users Like Highpower's post:
Mayhem (06-15-2014), EdK (06-15-2014)
Posts: 535
Threads: 39
Joined: Jan 2013
Location: Kelowna, BC, Canada
Not seeing any pictures.
Mike
If you can't get one, make one.
Hawkeye, proud to be a member of MetalworkingFun Forum since Jan 2013.
Posts: 8,863
Threads: 319
Joined: Feb 2012
Location: Arizona/Minnesota
(06-15-2014, 11:08 AM)Hawkeye Wrote: Not seeing any pictures.
Well that's strange. They were there at one time.
Oh, I see kenne modified his post yesterday and deleted the pictures for some reason.
Ed
Posts: 97
Threads: 5
Joined: Jun 2014
Location: las vegas burbs
The following 1 user Likes kenne's post:
DaveH (06-15-2014)
[img]http://[/img]Sorry , I messed up the photo's ,trying to fix them , so I will try again .
the point was they are easy to make and cheaper than the high priced spread . I think the new photo's will show what I mean better than the old ones did . Here Goes ...
.
.
.
.
.
.
.
kenne, proud to be a member of MetalworkingFun Forum since Jun 2014.
Posts: 97
Threads: 5
Joined: Jun 2014
Location: las vegas burbs
The following 1 user Likes kenne's post:
EdK (06-15-2014)
Thats better a little anyway , The cap is a swedge fit , and they just press in , the screw-in ones are just a little oversized and threaded in by brute force and a lack of common sense . I am about to make a larger one for my mill , I will show that one if it works as planned . No problem , I am about as sensitive as a rhino , and nearly as thick . I may have to invest in a camera that speaks to me .
kenne, proud to be a member of MetalworkingFun Forum since Jun 2014.
Posts: 97
Threads: 5
Joined: Jun 2014
Location: las vegas burbs
kenne, proud to be a member of MetalworkingFun Forum since Jun 2014.
|
