Posts: 313
Threads: 34
Joined: Nov 2013
Location: Kamloops, BC, Canada
The following 2 users Like Shawn's post:
EdK (11-21-2013), Trigrman (11-21-2013)
Ok it's not really a project but I just cut about half the length of the bristles off the small painters brush (about 1-1.5" wide) I use for brushing off chips from the lathe mill etc and was amazed at how much better it works? No more chips caught up in the brush and it does a way better job of cleaning the ways and t-slots (pun intended). I have 5-6 of these brushes in the shop and they all got a quick haircut after trying the first one.
Shawn
Shawn, proud to be a member of MetalworkingFun Forum since Nov 2013.
Posts: 28
Threads: 2
Joined: Mar 2013
Location: Somers, WI. USA
Interesting idea Shawn! I'll give it a try.
Posts: 3,799
Threads: 184
Joined: Jun 2012
Location: Farmington Hills, Michigan
I do that with acid brushes as well. They get a lot more aggressive with short bristles.
Tom
Posts: 2,344
Threads: 53
Joined: Feb 2012
Location: Spencer MA USA
Having just bought a box of 50 chip brushes (some of which I gave to Mayhem), I think I can afford to try this and if I don't care for the results...I've got backup!
Thanks for the tip! (Said the prostitute to the leper.)
Posts: 8,889
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
(11-21-2013, 09:37 PM)TomG Wrote: I do that with acid brushes as well. They get a lot more aggressive with short bristles.
Tom
Posts: 62
Threads: 11
Joined: Jun 2012
Location: Texas
Great idea. I'll try it.
If it's crazy but it works, it's not crazy.
![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)
