Power Crossfeed for Asian 9X20s

[Bill Gruby]

Hi my name is Bill and I'm a machine-a-holic.

"Billy G"

[Bill Gruby]

War Dept. is on my case. No sense of humor today. I have to call it a day. Before and after on the #1 pulley. Pic #2 is mounted in place.

"Billy G"

[Bill Gruby]

We are here. Both pulleys modified and in place.

"Billy G"

[Bill Gruby]

The black knob is the friction override that will allow the drive to slip if there is too much drag..

"Billy G"

[TomG]

That ought to do the trick. Looks like it's almost time for the spark test.

Tom

[Bill Gruby]

I need to put the drive pin in and get a 22 inch 40 tooth X 2.5mm pitch belt and it's a done deal Tom. Abel Trans. tomorrow should have one.

"Billy G"

[Bill Gruby]

1/16 endmill at 1650 really makes your day in a manual mill. The it the engagement pin slot. All I need not is the belt. It will be here Saturday. I tried it with a vacuum cleaner anr it works OK. A little slip was evident but I think that was just the type of belt.

"Billy G"

[Bill Gruby]

I'm all done. Abel Transmission found two belts at their warehouse. This thing is smooooooth running. Thank you Tom for your help and thanks to all for watching.

"Billy G"

[TomG]

Nice job Bill and thanks for sharing it with us. How about a video demo?

Tom

[Bill Gruby]

I don't know how to do a video or I would Tom. Maybe my son knows how, I will check.

"Billy G"