05-24-2016, 07:33 AM
Thanks,
The test started out poorly, the splitter circuit worked but couldn't get movement on anything else, turned out two vanes in the small pump were stuck. That pump could be a little bigger, its .1 cubic inch per revolution could do with a .2 but it was in stock.
The hydraulics will load the engine but the saw didn't seam to phase it at all, mind a pretty small Ash test piece. Will have to get the chain oiler working now for a real test.
Yes I was a happy camper when it all seamed to work.
Thanks for watching
The test started out poorly, the splitter circuit worked but couldn't get movement on anything else, turned out two vanes in the small pump were stuck. That pump could be a little bigger, its .1 cubic inch per revolution could do with a .2 but it was in stock.
The hydraulics will load the engine but the saw didn't seam to phase it at all, mind a pretty small Ash test piece. Will have to get the chain oiler working now for a real test.
Yes I was a happy camper when it all seamed to work.
Thanks for watching
Free advice is worth exactly what you payed for it.
Greg
Greg