02-28-2017, 07:51 AM
Getting ready to make a spacer/bushing, needs to have a keyway. Buying the tooling what should I look for, suggestions regarding type, teeth width of slitter are welcomed information.
What I have in mind for the tooling is a keyed arbor and slitter blade. The material is alum, can the same slitter and tooth count be used on different material HSS/ALUM. General purpose diameter, what cuts best and stays sharp. Thinking a 1/16 width could be sturdy and wont hog out to big of a cut.
Thanks in advance,
Greg
What I have in mind for the tooling is a keyed arbor and slitter blade. The material is alum, can the same slitter and tooth count be used on different material HSS/ALUM. General purpose diameter, what cuts best and stays sharp. Thinking a 1/16 width could be sturdy and wont hog out to big of a cut.
Thanks in advance,
Greg
Magazines have issues, everything else has problems