New Project

[stevec]

Tom, my Mill Drll has a 32 X 9.5 inch table and I used a 4" Kurt clone vise with good success. I recomend you not to bother getting the swivel base I only ever used it once or twice and each time it had to be dialed in again. With only 18" from table to spindle you don't want to waste some of that on an unused swivel base. I suggest you make up some keys for the slots in the vise base that fit the T slots in the RF-45, switching back from rotab or other set-up is quick and easy, just my take on it.
Enjoy and keep us up to date on your projects.