once the rounds are fired they should be sized to the chamber that they were fired in, unless you full length resize the cases. If you only resize the necks nothing should change and the headspace should be at minimum.
set them in a pan of water up to the shoulder of the case with the mouth pointing up, heat with a torch until red hot, knock them over in to the water to anneal them.
DA
set them in a pan of water up to the shoulder of the case with the mouth pointing up, heat with a torch until red hot, knock them over in to the water to anneal them.
DA
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!