here is a photo of a boring bar that I said the next time I was in the store I would see about taking a photo of it. I had mentioned that it was 4" in dia. I was wrong its 3 inches in diameter and roughly 4 feet long.
its carbide is what I was told and from the scared up sticker on it the max load is 7000 N at 75 degrees C
its carbide is what I was told and from the scared up sticker on it the max load is 7000 N at 75 degrees C
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
If life seems normal, your not going fast enough!