I NEED A Compressor

[f350ca]

If you go with copper lines use a good quality hose section from the tank to isolate vibrations and noise. You may find you have to lag it down to the concrete to stop it walking around on the floor, Rubber pads between the feet and the floor will help a little bit on the noise. Get rid of the tank drain and use an elbow to bring the line out to the side and put in a ball valve. The ones they use will rust up, seize so you cant open them or start leaking. If you have a sump pump or floor drain run a line from the tank drain over there, they produce lots of water.