Posts: 62
Threads: 11
Joined: Jun 2012
Location: Texas
As I had mentioned in a couple of other posts I planned on getting a Grizzly G9972Z 11x26 Lathe this Summer.
I pulled the trigger lastweek. Earlier today the shipping company SAIA called to setup the delivery.
I've built (well actually probably WAY over built) a table for it. I also went ahead and got a precision machinist level from
Shars a couple of months ago. So in the next couple of days my Father in Law and I are going to have some fun setting
this bad boy up. If any body is interested I'll grab some pictures.
If it's crazy but it works, it's not crazy.
Posts: 438
Threads: 67
Joined: Sep 2012
Location: Central Mass.
(06-25-2013, 08:14 PM)marfaguy Wrote: As I had mentioned in a couple of other posts I planned on getting a Grizzly G9972Z 11x26 Lathe this Summer.
I pulled the trigger lastweek. Earlier today the shipping company SAIA called to setup the delivery.
I've built (well actually probably WAY over built) a table for it. I also went ahead and got a precision machinist level from
Shars a couple of months ago. So in the next couple of days my Father in Law and I are going to have some fun setting
this bad boy up. If any body is interested I'll grab some pictures.
Well you know the old saying......"If there aren't pictures.....it didn't happen!"
Congrats on your new machine!
Best Regards,
Russ
Posts: 4,460
Threads: 184
Joined: Feb 2012
Location: Missouri, USA
Ahhhh.... the smell of a new machine. Gotta love it.
Don't let the excitement of the trucks arrival get the better of you though. Make sure you give the lathe a good looking over, and make sure all the parts and accessories are there BEFORE you sign for the delivery. Make a note of any damages or missing items on the freight bill if you do accept the shipment.
After that, have fun making chips!
Willie
Posts: 8,860
Threads: 319
Joined: Feb 2012
Location: Arizona/Minnesota
Congratulations on the new tool, but I don't see any stand or level so I don't think you have them.
Ed
Posts: 4,683
Threads: 93
Joined: Feb 2012
Location: Perth, Australia
06-26-2013, 06:19 AM
(This post was last modified: 06-26-2013, 06:20 AM by Mayhem.)
Give the guy a break guys. If there are no pics, you should set an example and post a pic with your response. Something like this:
worthless.gif (Size: 41.63 KB / Downloads: 145)
Hunting American dentists since 2015.
Posts: 62
Threads: 11
Joined: Jun 2012
Location: Texas
06-26-2013, 06:43 PM
(This post was last modified: 06-26-2013, 06:47 PM by marfaguy.)
It's here!
Here's the old MicroMark 7X16 on the table I built a couple of months ago for the new Lathe.
I did a partial cutout on the bottom of the legs so I could add levelers.
The table was leveled with a carpenters level. I know from setting up the MicroMark that's
the table is high on the left about .004-.007 Which is what I want.
Uncrating the beast
and finally up on the table.
This weekend I'll start bolting down and leveling with the machinist level.
If it's crazy but it works, it's not crazy.
Posts: 62
Threads: 11
Joined: Jun 2012
Location: Texas
Oh and for Ed...
The machinist level.
If it's crazy but it works, it's not crazy.
Posts: 438
Threads: 67
Joined: Sep 2012
Location: Central Mass.
Very nice! Quite the increase in size as well.
Now that we've seen pics......next up......VIDEO!
Lets see some chips!
Congrats on your new machine!
Russ
Posts: 8,860
Threads: 319
Joined: Feb 2012
Location: Arizona/Minnesota
(06-26-2013, 06:47 PM)marfaguy Wrote: Oh and for Ed...
The machinist level.
Now you're getting the hang of it.
Ed
Posts: 4,513
Threads: 139
Joined: Feb 2012
Location: Kempton Park. South Africa
Great! - keep the pics coming
DaveH
