+- MetalworkingFun Forum (http://www.metalworkingfun.com)
+-- Forum: Machining (http://www.metalworkingfun.com/forum-5.html)
+--- Forum: Projects (http://www.metalworkingfun.com/forum-7.html)
+--- Thread: SloMo Wobbler (/thread-103.html)
SloMo Wobbler - DaveH - 02-28-2012
A small ocsilating engine in slow motion
Just as a bit of info. It is running at about 700rpm, about 12 revs/second.
The real time length of the video clip is about 0.9 sec, if you count the revolutions it should be about 10 or 11.
Now wasn't that bluudy exciting
DaveH
RE: SloMo Wobbler - TOM REED - 02-28-2012
(02-28-2012, 01:41 PM)DaveH Wrote: A small ocsilating engine in slow motion
Just as a bit of info. It is running at about 700rpm, about 12 revs/second.
The real time length of the video clip is about 0.9 sec, if you count the revolutions it should be about 10 or 11.
Now wasn't that bluudy exciting
DaveH
VERY NICE tom
RE: SloMo Wobbler - EdK - 02-28-2012
Dave,
I assume you made that, is that correct?
Nice little engine that runs very nice.
Ed
RE: SloMo Wobbler - DaveH - 02-28-2012
Thanks Tom
Thanks Ed,
I made it all on a Sherline lathe and mill, I'm a bit of a fan of Sherline stuff
DaveH
RE: SloMo Wobbler - EdK - 02-28-2012
(02-28-2012, 04:10 PM)DaveH Wrote: I made it all on a Sherline lathe and mill, I'm a bit of a fan of Sherline stuff
DaveH
Just goes to show you that size doesn't matter as long as it's a well made tool like a Sherline.
Ed
RE: SloMo Wobbler - DaveH - 03-01-2012
Just some pics.
On the Sherline cutting the fly wheel
[attachment=164]
[attachment=165]
Straight off the mill - still needs a bit of cleaning up
[attachment=166]
Shows the size
[attachment=167]
After a bit of spit and polish
[attachment=168]
DaveH
RE: SloMo Wobbler - ETC57 - 03-01-2012
I never get tired of that little clip!
Dave how long to make something like that?
Jerry.
RE: SloMo Wobbler - EdK - 03-02-2012
Dave,
Did you make that angle plate that the 3-jaw chuck is mounted on?
Ed
RE: SloMo Wobbler - DaveH - 03-02-2012
(03-02-2012, 07:22 AM)EdAK Wrote: Dave,Hi Ed,
Did you make that angle plate that the 3-jaw chuck is mounted on?
Ed
Yes I did, what I'll do is take some pics and start a new thread.
DaveH
RE: SloMo Wobbler - EdK - 03-02-2012
Good idea Dave.
