03-06-2022, 04:30 PM
(03-05-2022, 09:38 PM)TomG Wrote: It makes me want to get back to the shop, if I actually had a shop.
Tom
What you talkin bout Willis? 
Willie
|
Project Bar Stock Steam Engine
|
 What you talkin bout Willis?
03-06-2022, 05:36 PM
(03-06-2022, 04:30 PM)Highpower Wrote:(03-05-2022, 09:38 PM)TomG Wrote: It makes me want to get back to the shop, if I actually had a shop. When we moved a year ago, everything went into storage until the new shop was built. Most everything is moved in now, but nothing is powered. I've been reduced to a tablesaw and drill press in the corner of my garage. Tom ![[Image: TomsTechLogo-Profile.png]](http://tomstechniques.com/wp-content/uploads/2013/11/TomsTechLogo-Profile.png)
03-06-2022, 08:17 PM
(03-06-2022, 05:36 PM)TomG Wrote:(03-06-2022, 04:30 PM)Highpower Wrote:(03-05-2022, 09:38 PM)TomG Wrote: It makes me want to get back to the shop, if I actually had a shop. So are you waiting for 3 phase service to be run to the shop or is it something else? 
Willie
03-06-2022, 08:44 PM
(03-06-2022, 08:17 PM)Highpower Wrote:(03-06-2022, 05:36 PM)TomG Wrote:(03-06-2022, 04:30 PM)Highpower Wrote: Just too many irons in the fire right now. I am heading up this weekend for a few days and will hopefully finish up the radiant heat system. The 3 phase will probably be the same rotary converter as the old shop, although I have been looking into digital converters, which are much more efficient. Tom 
03-06-2022, 10:39 PM
(03-06-2022, 08:44 PM)TomG Wrote: Just too many irons in the fire right now. I am heading up this weekend for a few days and will hopefully finish up the radiant heat system. The 3 phase will probably be the same rotary converter as the old shop, although I have been looking into digital converters, which are much more efficient. I understand all too well. Been selling off 25+ years of collecting machines. Even sold my metal 9 ft planner. That was a pleasant surprise. However no one wants my big old honking AIRCO stick welder. Guess I'll have to scrap it out. Ditto on my 4 ft X 10 ft welding table. Will also be selling off larger hand tools. Will not be taking any imperial wrenches nor anything 1/2" and 3/4" drive.
11-11-2023, 03:46 PM
(This post was last modified: 11-11-2023, 03:47 PM by Cross Slide.)
Well. Life and Procrastination seemed to have gotten in the way of my project.
I had a friend that said he would polish the aluminum base for me. I made the mistake of saying No Hurry!!! My brother has a CNC Wood Router. I had him make up the wooden base for me. He did the engraving with an epoxy inlay. I finally had a chance to work on my steam engine this weekend. This was the first time it has been fully assembled. It is still a bit on the stiff side while turning it over by hand. But there is no binding. I haven’t had any air pressure through it yet. I have to pick up a couple fittings to hook it up. Once I have air supplies to it I will also be able to adjust the timing. But I thought I would share what I have so far. Trevor
Lathe - Craftex CX701, Mill - Craftex B30 Mill/Drill, DRO - blu-DRO
|
|
« Next Oldest | Next Newest »
|
Users browsing this thread: 9 Guest(s)