|
Fire Wood Processor
|
04-03-2016, 08:28 AM
(04-02-2016, 11:46 PM)Mayhem Wrote: One thing that is not lost on me however, is the quality of Greg's work and his capacity to progress through so many projects. Two words... Not - Human. He can't be. He gets more done in a day than I can get done in a year! 
Willie
04-04-2016, 01:59 AM
I have never seen a vise like you have mounted on your shaper. Very good idea.
04-15-2016, 09:05 PM
Been doing lots of little bits that aren't worth posting. Wiring the engine, building throttle and shut down linkages etc.
With a box of fittings in hand we started running pipe today. Takes a while to get your head around where they need to run to avoid the next one and what direction to make the bend (yah had to cut a couple of bends off) . One end is flared but the ends at the valve had to be silver soldered on, the valve is too small for the flare nuts to clear each other. ![[Image: IMG_2129.jpg]](https://lh3.googleusercontent.com/-IGdWR0hBKjU/VxGb2Y6lvlI/AAAAAAAADwU/Aa7wTEZLugYvtRJo1-1uK7y6dSO55kXXQCCo/s912-Ic42/IMG_2129.jpg)
Free advice is worth exactly what you payed for it.
Greg
04-16-2016, 10:53 AM
(04-15-2016, 09:05 PM)f350ca Wrote: Been doing lots of little bits that aren't worth posting. Wiring the engine, building throttle and shut down linkages etc. Those steel pipes are going to help a lot with cooling the oil. I was getting ready to start hammering on you again about not posting your progress. Looks really professional so far. Great job. 
04-16-2016, 11:59 AM
Much better than hose would, you see a lot of equipment thats all hose then add an oil cooler. Plus the tubing was free and the flared ends are a lot cheaper than the crimp on hose ends.
Free advice is worth exactly what you payed for it.
Greg  (04-03-2016, 07:52 AM)Pete O Wrote: I gotta get me a shaper- I have been making arbor spacers for the U2 mill when I get the chance (which is seldom) and the keyways have taken me a couple of hours each. Although somehow I feel that the gap between Greg's work and my work is more than just owning a shaper... How 'bout a keyway broach? If you have a arbor press (preferred) or a hydraulic press you can use a broach. |
|
« Next Oldest | Next Newest »
|
![[Image: IMG_2150.jpg]](https://lh3.googleusercontent.com/-TjLHfqjaYes/VxVQMExc2cI/AAAAAAAADws/un5nQmMjXFwkqQ20xDSs3QV-ujfVzOQlgCCo/s1280-Ic42/IMG_2150.jpg)
