Posts: 1,827
Threads: 51
Joined: Apr 2012
Location: Oklahoma
lot of hammer handles hiding in that log
dallen, proud to be a member of MetalworkingFun Forum since Apr 2012.
If life seems normal, your not going fast enough!
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
09-26-2012, 04:09 PM
(This post was last modified: 09-27-2012, 06:46 AM by stevec.)
Greg did you count the rings? Just curious.
Here's a little liquor cabinet I made from ash. I stained it trying to get a "Mission Oak" look, I think I succeeded.
The upper right hand corner of the left hand door has opened up a bit due to the wild swings of humidity here from winter heating to summer rains. I'll have to see if I can inject some glue and draw it back together with a pipe clamp.
Gee, sorry guys, I must have renamed it and thought I was done. Or maybe Greg is right I think I opened the doors and while contemplating an open door pic I might have tried to reduce the "clutter" inside.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
Posts: 537
Threads: 15
Joined: Jun 2012
Location: Cambridge, England
(09-26-2012, 04:09 PM)stevec Wrote: Greg did you count the rings? Just curious.
Here's a little liquor cabinet I made from ash. I stained it trying to get a "Mission Oak" look, I think I succeeded.
Sorry Steve,
I can't see the picture, can anyone else see it?
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.
Posts: 8,890
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
I can't see a picture either. I think Steve might have had emptied the cabinet prior to posting his message.
I'd like to see that cabinet. Oak is one of my most favorite woods, and especially Mission Stained oak.
Ed
Posts: 537
Threads: 15
Joined: Jun 2012
Location: Cambridge, England
Either that or he polished that stain so well that he's polished it away completely
Sorry Steve, it looks like you might not have posted photo, but I for one would really like to see it,
Regards
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.
Posts: 3,003
Threads: 51
Joined: Apr 2012
Location: Ontario
09-26-2012, 08:12 PM
(This post was last modified: 09-26-2012, 08:24 PM by f350ca.)
Steve, of course I had to count the rings, 87 years old. He emptied the cabinet, only explanation for the picture. For some reason my phone isn't uploading my pictures so no daylight shots. Was the full of the tractor to lift the butt log. Looks like the bottom two logs are veneer grade. The four logs scaled out at 750 board feet. Still shingling the walls of the drying shed, get that done and we'll try sawing these babies.
Got the phone working.
Here's a shot with Saddie for perspective.
These are the top ends of the logs, smallest measured 20 inches. Still have to get the logs from above the crotch.
Free advice is worth exactly what you payed for it.
Greg
Posts: 258
Threads: 13
Joined: Aug 2012
Location: USA
Look at those twigs
SnailPowered, proud to be a member of MetalworkingFun since Aug 2012.
Posts: 8,890
Threads: 320
Joined: Feb 2012
Location: Arizona/Minnesota
Those are some nice, solid logs. They'll make some gorgeous lumber.
Ed
Posts: 537
Threads: 15
Joined: Jun 2012
Location: Cambridge, England
I would have thought Ash was far slower growing than that, 87 years isn't really that long to grow a tree of that size. Of the logs we see in that last shot, 7 of them at 8 feet long, that's 56 feet of "Log" so how tall was the whole thing? it must have been 75 feet plus?
Rick
Whatever it is, do it today, Tomorrow may not be an option and regret outlasts fatigue.
Posts: 2,685
Threads: 29
Joined: Feb 2012
Location: Nova Scotia, Canada
Guys, I've edited the post and the pic is there now as well as a little 'splanashun.
Greg, 87 years, thanks . I think the first Oak I took off our front lawn here in NS was 96 years, made me wonder what I'd done!
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.
|