05-11-2020, 06:19 PM
Hi Guys,
I've been posting on another forum topic and everyone's been helping me with a project problem. Don't know if anyone "happen" to see this on u-tube, but I did and decided I had to have one. Thought you might be interested just because it's rather unusual and there are only about half a dozen have been made, I believe. It's an AR-15 80% Lower receiver with the Upper converted to bolt action. There were no dimensions - only a video so I had to decide where to place the bolt (literally a shoulder bolt) and where to divide the charging bolt basically in 1/2; to permit the bolt enough rearward movement to scoop the next round (300 Blackout) off the magazine. Before it bumps into the alum. plug I made for the buffer tube threads. Please see pix, if I can attach it.
Don
I've been posting on another forum topic and everyone's been helping me with a project problem. Don't know if anyone "happen" to see this on u-tube, but I did and decided I had to have one. Thought you might be interested just because it's rather unusual and there are only about half a dozen have been made, I believe. It's an AR-15 80% Lower receiver with the Upper converted to bolt action. There were no dimensions - only a video so I had to decide where to place the bolt (literally a shoulder bolt) and where to divide the charging bolt basically in 1/2; to permit the bolt enough rearward movement to scoop the next round (300 Blackout) off the magazine. Before it bumps into the alum. plug I made for the buffer tube threads. Please see pix, if I can attach it.
Don