Posts: 8,854
Threads: 318
Joined: Feb 2012
Location: Arizona/Minnesota
Mike,
I took a look at your videos again and I was able to get a pretty good view of your drawing shown on the video. There are two dimensions on that drawing that are different than the drawing you posted in this thread. See sketch below. That looks better.
Ed
Posts: 8,854
Threads: 318
Joined: Feb 2012
Location: Arizona/Minnesota
Mike,
When you get a chance, would you please measure the length of the guide bars on yours?
Thanks,
Ed
Posts: 173
Threads: 2
Joined: Jun 2015
Location: Utah
Will do Ed. Been a busy past couple of days at work and my home shop. I will try to measure those bars tonight.
As far as the dimensions on the video/thread I will double check them but I do remember changing one or two on the fly as I was machining as they didn't add up. Remember my earlier statement about my CAD being in my head not on a PC.
I will double check them for ya.
Mike.
Posts: 8,854
Threads: 318
Joined: Feb 2012
Location: Arizona/Minnesota
(07-02-2015, 08:46 AM)zmotorsports Wrote: Will do Ed. Been a busy past couple of days at work and my home shop. I will try to measure those bars tonight.
As far as the dimensions on the video/thread I will double check them but I do remember changing one or two on the fly as I was machining as they didn't add up. Remember my earlier statement about my CAD being in my head not on a PC.
I will double check them for ya.
Mike.
That would be great Mike. I appreciate all of your help with this.
By the way, my comments about the drawing dimensions where not meant as a criticism so I hope you don't take them as such. With your help I can get some CAD drawings done that you can give to people that would like to copy your design. It's a really clean design. I'll build mine from the resulting CAD drawings to prove out the dimensions.
Ed
Posts: 173
Threads: 2
Joined: Jun 2015
Location: Utah
(07-02-2015, 08:59 AM)EdK Wrote: (07-02-2015, 08:46 AM)zmotorsports Wrote: Will do Ed. Been a busy past couple of days at work and my home shop. I will try to measure those bars tonight.
As far as the dimensions on the video/thread I will double check them but I do remember changing one or two on the fly as I was machining as they didn't add up. Remember my earlier statement about my CAD being in my head not on a PC.
I will double check them for ya.
Mike.
That would be great Mike. I appreciate all of your help with this.
By the way, my comments about the drawing dimensions where not meant as a criticism so I hope you don't take them as such. With your help I can get some CAD drawings done that you can give to people that would like to copy your design. It's a really clean design. I'll build mine from the resulting CAD drawings to prove out the dimensions.
Ed
No problem. I am only human and have a tendency to make mistakes on occassion. But let's just keep that between us, huh.
Mike.
Posts: 8,854
Threads: 318
Joined: Feb 2012
Location: Arizona/Minnesota
The following 1 user Likes EdK's post:
Mayhem (07-02-2015)
(07-02-2015, 12:02 PM)zmotorsports Wrote: ....
.... I am only human and have a tendency to make mistakes on occassion. But let's just keep that between us, huh.
Mike.
No problem, your secret is safe with me.
Ed