D.T.I refit part one

[krv3000]

hi all i have bin given a bunch of D.T.I gages to reaper for jb3cx their not his their are for a Friend of his all of them have bin fiddled with so i have only managed to get 3 of them working I'm gowning to do a post on one that needs a new privet and a post on haw i mack the styluses up but I'm growing to sho you haw to on thees two Russian ones and point out the damage dun to one on is complete and one is missing its lens and retaining ring with this type of D.T.I you get at the hart of the clock from the face side first their is a retaining ring that holds in the lens once this is out you need to remove the hand then remove the Daile once its is off their is two screws that hold the mane Daile body to the stiles bode remove them screws once all a part give it a good clean pay a tension to the privet holes you will see in the pics their is two springs one is in the shape of a coil the other is a wirer no mater Wat type of D.T.I you tack a part its the coil spring that is the most important as this must have sum pre tenshon IE wind up just a bit for the clock to work properly i reassemble is revers on the way you dismantled it used the Daile and lens of one for the other one two finish it off as the other one had broken pivots and missing Jewel for a privet hole but the mane problem was the Daile see pick the silver thing on the parting off blade is a privet that I'm growing to reaper right pics