06-30-2012, 03:11 PM
Dan,
One thing to know is the ER25 and the ER32 collets are not interchangeable.
That is to say an ER25 collet will not fit into an ER32 collet holder.
ER25 the range is 1mm to 16mm
ER32 the range is 2mm to 20mm
If you plan on using larger end mills than 16mm go for the ER32
That's my 2c's
DaveH
One thing to know is the ER25 and the ER32 collets are not interchangeable.
That is to say an ER25 collet will not fit into an ER32 collet holder.
ER25 the range is 1mm to 16mm
ER32 the range is 2mm to 20mm
If you plan on using larger end mills than 16mm go for the ER32
That's my 2c's
DaveH