02-26-2023, 11:33 AM
I trued up the small wheels on the lathe and that helped with tracking but not with the vibration. I took a look at the drive wheel and it was wobbling side to side and around the circumference. 
Modified the arbor I had made for the small wheels and used that to true up the drive wheel. What a difference! Hardly any vibration at all.
I tested it by grinding a HSS lathe bit for my fly cutter. It makes a banging sound when I think it hits the seam of the belt. I wasn't expecting that with the Klingspor belts. I need to investigate that some more.
Ed
Modified the arbor I had made for the small wheels and used that to true up the drive wheel. What a difference! Hardly any vibration at all.
I tested it by grinding a HSS lathe bit for my fly cutter. It makes a banging sound when I think it hits the seam of the belt. I wasn't expecting that with the Klingspor belts. I need to investigate that some more.
Ed