04-11-2018, 08:47 PM
I'm machining a backing plate so I can mount my 5C Collet Chuck.
I'm at the point of needing to drill and tap the holes for the studs that will hold the backing late to the lathe. My lathe has 3 studs equally spaced.
How do I determine what the Diameter is of a 3 hole bolt circle?
Trevor
I'm at the point of needing to drill and tap the holes for the studs that will hold the backing late to the lathe. My lathe has 3 studs equally spaced.
How do I determine what the Diameter is of a 3 hole bolt circle?
Trevor
Lathe - Craftex CX701, Mill - Craftex B30 Mill/Drill, DRO - blu-DRO