09-13-2017, 02:13 AM
(09-12-2017, 09:39 PM)Dr Stan Wrote: The first surface grinders were modified planners. A shaper with a tool post grinder should work just fine, just don't try to take shaper hogging cuts with it.
Yes - I could see a heavy cut ending in many tears and bits of grinding wheel as the shaper is unlikely to be the first thing to give up....
I found a few pictures online - ranging from a mounted dremel, to the toolpost grinder style as you suggested, and also a wheel directly mounted on the motor shaft like a bench grinder.
I think the separate motor and spindle as on a classic toolpost grinder would be the most flexible, as it allows easy changing of the drive pulley to get the correct RPM for different size wheels, and the spindle itself takes up less vertical height.
Steve