08-27-2012, 08:16 AM
Ed,
The plasma cuts all the way through the plate. I used a straight edge clamped to the plate and marked the webs I wanted to leave uncut. A cutoff wheel on a grinder would also work. A mig welder would have also worked to fill in the gaps.
Dan
The plasma cuts all the way through the plate. I used a straight edge clamped to the plate and marked the webs I wanted to leave uncut. A cutoff wheel on a grinder would also work. A mig welder would have also worked to fill in the gaps.
Dan
Collecting tools for 30 years.