03-07-2012, 05:56 AM
Hi Lads
Made a few more parts .
Thumb screws to lock the clamp bars in position .
![[Image: normal_P1040667.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040667.jpg)
![[Image: normal_P1040661.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040661.jpg)
And the reason for the slots ,,so i could position the clamp bolts were ever needed ,, in the original CAD model i had just a few tapped holes along each leg , knowing my luck first job they would be in the wrong place
Sliding nuts
![[Image: normal_P1040681.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040681.jpg)
Nuts to lock them in position for repetitive jobs
![[Image: normal_P1040664.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040664.jpg)
![[Image: normal_P1040688.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040688.jpg)
![[Image: normal_P1040687.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040687.jpg)
![[Image: normal_P1040685.jpg]](http://www.nam-engineering.com/cm/albums/userpics/10002/normal_P1040685.jpg)
Screws in photos are not the ones i will be using , there just there as an example
Rob
Made a few more parts .
Thumb screws to lock the clamp bars in position .
And the reason for the slots ,,so i could position the clamp bolts were ever needed ,, in the original CAD model i had just a few tapped holes along each leg , knowing my luck first job they would be in the wrong place
Sliding nuts
Nuts to lock them in position for repetitive jobs
Screws in photos are not the ones i will be using , there just there as an example
Rob