07-28-2012, 01:23 PM
Here's a couple of pics of the head I resurfaced for my '53 Allis-Chalmers model CA.
I took off 100 thou. with a flycutter I made up. The pics don't show the finish very well but I was pleased, Can't take any better pics. now
'cause the heads on the block and she's up and running (with a little bit more compression than she had).
I took off 100 thou. with a flycutter I made up. The pics don't show the finish very well but I was pleased, Can't take any better pics. now
'cause the heads on the block and she's up and running (with a little bit more compression than she had).
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.