Rick, as I remember it would "join" the blade but wouldn't last very long after grinding the joint. If I remember, it would break just tensioning the blade even if it survived mounting on the saw. I don't remember anealing the blade, maybe it was way too brittle?
What anealing procedure would you recomend Rick?
The only "button" it had was the black button seen at the bottom of the box in the first pic.
I know nothing of "blade preload" . One of the little clamp/holders slid on the two round bars to bring the ends together and then you pressed the black button.
What anealing procedure would you recomend Rick?
The only "button" it had was the black button seen at the bottom of the box in the first pic.
I know nothing of "blade preload" . One of the little clamp/holders slid on the two round bars to bring the ends together and then you pressed the black button.
Busy Bee 12-36 lathe, Busy Bee Mill drill, Busy Bee 4x6 bandsaw, Homemade 9x17 bandsaw, Ad infinitum.