X Power Feed

[Highpower]

(12-18-2023, 02:58 PM)EdK Wrote: I stumbled upon a 220RPM motor that had the same mounting as the 100RPM motor that I originally tried on the X axis. It claimed to have 30n-m of torque vs 3n-m on the 100RPM. So I bought one thinking it should be perfect and I could use all of the work I put into the 100RPM motor on this one.
I tested it out on the mill today and what a joke! It had less torque than the 100RPM motor has.  

Ed

If it sounds too good to be true...