12-18-2023, 02:58 PM
I stumbled upon a 220RPM motor that had the same mounting as the 100RPM motor that I originally tried on the X axis. It claimed to have 30n-m of torque vs 3n-m on the 100RPM. So I bought one thinking it should be perfect and I could use all of the work I put into the 100RPM motor on this one.
I tested it out on the mill today and what a joke! It had less torque than the 100RPM motor has.
The standard X axis mill power feeds run at about 200RPM so this motor should have given me plenty of torque and a decent rapid movement speed. It's going back to Amazon.
Back to figuring out how to mount the Vevor power feed.
Ed
I tested it out on the mill today and what a joke! It had less torque than the 100RPM motor has.
The standard X axis mill power feeds run at about 200RPM so this motor should have given me plenty of torque and a decent rapid movement speed. It's going back to Amazon.
Back to figuring out how to mount the Vevor power feed.
Ed