04-06-2022, 08:34 PM
(04-06-2022, 06:33 PM)Mayhem Wrote: I think you have made the correct decision Ed. I hope they discounted the price difference between the two machines.
I did like this in the spec sheet: T Slot Size Actual size 12mm, our 1/2″ kit listed is sized for this machine. Does this mean that other 1/2" t-nuts will be too big and that you will need to purchase the set from them?
I'm happy with my decision to return the Chinese mill and getting the Taiwanese mill instead, even if I did have to forego the DRO. I can always add it later.
The T-slots in the PM-25 are that same size. I was prepared for it and bought some 7/16" wide T-nuts for it. They fit and are usable but I'd like some with a better fit so I'm going to make my own when I have a usable mill. 1/2" definitely is too big so I don't know what they mean by their statement.
Ed