02-28-2022, 01:13 AM
(02-27-2022, 11:05 PM)EdK Wrote: Can you post the STL file and I can take a look at it.
Ed
Quote:EDIT: there has been a update to the drip tray (tormek_drip_tray_XL_v2.stl), to make it a bit more solid, and more easy to print, I have also added a little testfile (test.stl), so you can test your bridge settings before you print the whole drip tray.
The main file is too large to upload here Ed but here is the link to both files. https://www.thingiverse.com/thing:4791736/files
Willie