01-10-2022, 11:26 AM
You probably will want to knock that drill chuck off and check the spindle taper for actual dimensions before deciding what adapter to order, and what size retaining screw you want to use.
I'm surprised at the MT2 male tapered spindle -- I have a similar 8" bench drill and it has a Jacobs JT33 taper. Other drill presses are usually a female MT taper and then you use an MT male to JT male adapter (tang type) to mount a JT drill chuck.
I'm surprised at the MT2 male tapered spindle -- I have a similar 8" bench drill and it has a Jacobs JT33 taper. Other drill presses are usually a female MT taper and then you use an MT male to JT male adapter (tang type) to mount a JT drill chuck.