01-07-2022, 07:41 PM
I recently picked up an old Woodhouse and Mitchell Junior 70 lathe from a deceased estate. The clutch lever doesn't move. I'm not sure if the previous owner has just overtightened the clutch or the selector ring has moved, given the drawing appears to show this sitting up against the clutch body.
If anyone out there has one of these lathes, I'd really appreciate it if you could remove the circular access plate on the back of the headstock and take a photo of your clutch for me. Both of the clutch (disengaged and engaged) and the position of the clutch lever when the clutch is disengaged.
Otherwise, all comments welcome.
If anyone out there has one of these lathes, I'd really appreciate it if you could remove the circular access plate on the back of the headstock and take a photo of your clutch for me. Both of the clutch (disengaged and engaged) and the position of the clutch lever when the clutch is disengaged.
Otherwise, all comments welcome.
Hunting American dentists since 2015.