Little Machine Shop Drill Press

[EdK]

(07-04-2021, 07:08 PM)Highpower Wrote:

(07-04-2021, 03:00 PM)EdK Wrote: The table will not swivel unless I put a screw driver in the slot to wedge it open. Not sure how I'm going to fix that since it won't fit in the minilathe to turn it down.  

Ed

Remove table, insert flap wheel into chuck, and have at the bore in the table arm to relieve it a bit?  

I thought of using a sanding drum to enlarge it. The flap wheel might be a better option.

Ed