12-18-2019, 05:36 PM
A long day in the shop and i finally got the motor together with all the valve clearances done ETC.
A question often asked is how am I going to set the valve timing., now I can show you.
Turn the cylinder to be timed to TDC ( this will have a mark on the prop flange )
Loosen the cam coupling..
Turn the cam to the valve overlap position and insert the timing pin to lock it in the corect place.
Lock up the cam coupling.
Move to the next cylinder in the fireing order.
Brian
A question often asked is how am I going to set the valve timing., now I can show you.
Turn the cylinder to be timed to TDC ( this will have a mark on the prop flange )
Loosen the cam coupling..
Turn the cam to the valve overlap position and insert the timing pin to lock it in the corect place.
Lock up the cam coupling.
Move to the next cylinder in the fireing order.
Brian
