12-07-2019, 10:13 PM
I got three of the four dodgy reinforcing plates cut off last night. This is what was behind one of them
the most predictable structural failure. The attachment point for the lift rams is right at the end of the big gussets, which finish with a sharp internal angle.
I'll add a pair of 600mm fish plates to each arm, similar to what I have done on the outside at the other end, centered over the lift point. My neighbours must be getting used to the sound of my angle grinders anyway.
the most predictable structural failure. The attachment point for the lift rams is right at the end of the big gussets, which finish with a sharp internal angle.
I'll add a pair of 600mm fish plates to each arm, similar to what I have done on the outside at the other end, centered over the lift point. My neighbours must be getting used to the sound of my angle grinders anyway.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
Milling Machine (n); a machine tool used in the production of lathe components.