12-11-2017, 05:07 AM
I switched to a QCTP a while ago Trevor and it is the best thing I have bought for the workshop- the difference when using the lathe just has to be experienced to be appreciated. I also thought I had best keep the option of using the 4-way holder but now i can't imagine what I might want to do that for- I'd just make a toolholder for whatever strange job might come up.
My lathe also has a spigot for the 4-way and no T-slot just like yours does, I machined a ring to fit over the spigot as I needed the extra height for the QCTP, if yours is the right height just sitting on the compound, I would think you're on the right track pressing out the existing stud and fitting one that is right for the new toolpost.
My lathe also has a spigot for the 4-way and no T-slot just like yours does, I machined a ring to fit over the spigot as I needed the extra height for the QCTP, if yours is the right height just sitting on the compound, I would think you're on the right track pressing out the existing stud and fitting one that is right for the new toolpost.
Lathe (n); a machine tool used in the production of milling machine components.
Milling Machine (n); a machine tool used in the production of lathe components.
Milling Machine (n); a machine tool used in the production of lathe components.