a new compound slide

[krv3000]

hi all last bit i had a pace of plat 14.5mm thick by 150x 400mm i hand cut this dawn to 105 x 105 then squared this off to 100 x 100mm in the 4 jaw chuck sos no pics of that bit then i marked up and drilled the two front fixing points then set it up in the 4 jaw chuck then made the plate 13mm thick once i Had dun that i marked out the place for the fixing ring then machined that out drilled three fixing points in to the clamping ring and drilled and taped m6 in the bottom of the compound slide bolted all together and all is dun right pics