05-19-2017, 10:07 AM
(This post was last modified: 05-19-2017, 10:12 AM by Mike E..
Edit Reason: after thought
)
Am I correct in that you are trying to remove the Morse taper barrel from the tailstock ?
If so, have a look to see if there is a removable setscrew on the tailstock which engages the slot under the Morse taper barrel to prevent its rotation. The slot may not be machined the full length of the barrel, and the setscrew is preventing its removal.
If so, have a look to see if there is a removable setscrew on the tailstock which engages the slot under the Morse taper barrel to prevent its rotation. The slot may not be machined the full length of the barrel, and the setscrew is preventing its removal.
Mike