12-09-2016, 07:44 AM
Looking for a nice upgrade for your compressor, how about auto drain? Have had this Moisture Minder installed for 5 years now.
A couple of things to point out, auto dumps at the beginning and end of the pressure recovery, no electrical all pneumatic. Can be mounted as seen above the drain valve height.
The original design and use of these are found in an air brake system, large trucks and emergency equipment, valves are made of stainless, no rust or clogging.
The other mod I made was the manual tank valve. Can see the petcock style valve, has been eliminated. Most know the petcock valve is guaranteed to seize at some point.
Notice that an icemaker water line tape valve is now used. Its advantage has a needle valve and seat, unlike the petcock commonalty found.
A couple of things to point out, auto dumps at the beginning and end of the pressure recovery, no electrical all pneumatic. Can be mounted as seen above the drain valve height.
The original design and use of these are found in an air brake system, large trucks and emergency equipment, valves are made of stainless, no rust or clogging.
The other mod I made was the manual tank valve. Can see the petcock style valve, has been eliminated. Most know the petcock valve is guaranteed to seize at some point.
Notice that an icemaker water line tape valve is now used. Its advantage has a needle valve and seat, unlike the petcock commonalty found.
Magazines have issues, everything else has problems